Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

Solid‐phase extraction and GC analyses of select agricultural pesticides and metabolites in stream water

Abstract

The occurrence of agricultural pesticides in surface waters around the USA has created a concern over the status of safe drinking water. Solid‐phase extraction (SPE) or liquid‐liquid extraction (LLE) is usually employed to concentrate trace levels of pesticides in water samples to concentrations that are measurable with advanced chromatographic instruments. We describe here a SPE and capillary gas chromatographic (GC) procedure to extract and concentrate trace levels of select agricultural pesticides and metabolites from stream water. Our SPE and GC method provides high sensitivity, with recoveries between 85% to 95%, and high reproducibility for 9 of the pesticides studied. The described method provided marginal recoveries of 19 and 60% for the atrazine metabolites.     

Supercritical Fluid Extraction for Forensic Analysis of Hydrocarbons in Soil

Supercritical fluid extraction (SFE) was investigated to evaluate its potential for obtaining high quality chromatographic fingerprints from soils encountered in environmental investigations. While the volatile and semivolatile fractions of light nonaqueous phase liquid (LNAPL) samples can be “fingerprinted” in a single chromatographic run, it is commonly not possible to obtain samples of LNAPL in the locations of interest. For this and other reasons, it was desirable to develop this method (SFE) of soil extraction, which allows chromatographic fingerprinting of the same quality routinely obtained with LNAPL so that environmental forensic investigations could be extended to areas beyond those containing LNAPL in monitoring wells. In this study, SFE was compared to conventional dichloromethane extraction. Both artificially spiked soil and soil from petroleum release sites were tested. Since water can be a problem when using the SFE method, particular attention was given to handling soils with high moisture contents. The SFE extracts showed excellent retention of low molecular components, including pentanes. Gas chromatography of SFE extracts yielded molecular distributions that showed no significant bias toward either low or high molecular weight components. These results show that SFE can be used to obtain an unbiased, single-run chromatographic “fingerprint” of both volatile and semivolatile hydrocarbons in contaminated soil samples.     

萃取净化电镀含镉废水

研究了二壬基萘磺酸(DNNSA)形成的微乳液从模拟含镉废水中萃取镉离子的工艺条件。分别考察了相体积比(O/A)、萃取时间、温度及萃取剂浓度对废水中镉离子萃取的影响。结果表明,萃取平衡时间为10 mim,降低温度及增加萃取剂浓度均有利于萃取。紫外光谱证实当DNNSA萃取镉时,所形成萃合物对萘环的结构无影响,且不会破坏微乳相的结构;分子荧光光谱表明镉离子对配体DNNSA有荧光猝灭作用。     

一种活性污泥总DNA提取方法的优化

对3种活性污泥DNA提取方法———传统蛋白酶K-SDS-氯仿异戊醇法(CPSCI法)、液氮研磨法和脱腐处理法进行了对比,并针对CPSCI法从污泥量、保温时间、裂解方式及沉淀时间等4个方面进行了优化。结果表明,优化的蛋白酶K-氯仿-异戊醇法(OPSCI法)采用污泥量0.10 g、37℃静置10 min,加SDS常温旋涡振荡及异丙醇直接离心等条件可获得长度在23.1 kb左右的DNA,OD260nm/OD280nm为1.86,稀释10倍后即可进行16S rDNA PCR。该方法重复性好,提取得率高,纯度好,操作简便,为常规实验室开展活性污泥微生物多样性研究提供了帮助。     

海上平台采油工艺设计浅析

文章通过实例,简要阐述了滩海、浅海、深海三种开发模式的特点、主要工艺及其适用性。指出各自存在的问题,并提出相应的建议,为海上勘探开发提供借鉴。     

固相萃取—气相色谱—质谱测定再生水中邻苯二甲酸酯类物质

探讨了一种再生水中邻苯二甲酸酯类物质的测定方法——固相萃取—气相色谱—质谱,检测了相关再生水标准中涉及的邻苯二甲酸二丁酯(DBP)和邻苯二甲酸二(2-乙基己基)酯(DEHP)两类物质。在质量浓度为20～1 000μg/L时,两类物质的回归方程的相关系数均大于0.999,检出限分别是0.060、0.002μg/L,DBP、DEHP的相对标准偏差分别为4.1%～7.4%、5.1%～6.1%。利用固相萃取技术进行预处理,平均加标回收率为96.6%、89.6%。检测了北京市4座再生水厂出水中DBP和DEHP含量,其中,DBP在1.74～5.59μg/L,低于《城市污水再生利用景观环境用水水质》(GB/T 18921—2002)规定的限值(不超过0.1mg/L),但高于《城市污水再生利用地下水回灌水质》(GB/T 19772—2005)规定的限值(不超过3μg/L);DEHP在0.42～4.93μg/L,满足GB/T 19772—2005要求(不超过8μg/L)。     

气相色谱-质谱法分析污水中溶解态有机物

采用0.45μm玻璃纤维滤膜将污水分离为悬浮态和溶解态有机物质,以二氯甲烷为萃取剂,采用液液萃取-气质联用法对污水中溶解态有机物进行测定,同时还对萃取条件(萃取次数,萃取时间,无机盐加入量)进行优化.结果表明:萃取回收率最高的是每个pH范围各萃取2次、静置5 min,氯化钠加入15g.该方法分析时间短,准确度好(样品平均加标回收率为91.1％ ～ 103％),精密度高(相对标准偏差小于5％),易于操作.     

U型工作面上隅角埋管瓦斯抽采数值模拟研究

传统的U型通风工作面上隅角瓦斯积聚现象经常出现，严重制约着矿井正常生产能力的有效发挥，对矿井安全生产造成重大威胁。基于前人对采空区非均质多孔介质气体运移理论的研究，采用Fluent软件数值模拟研究了U型和上隅角埋管条件下U型通风系统的静压力场和瓦斯浓度场。研究结果表明：在相同的模型参数条件下，U型通风容易造成上隅角瓦斯积聚，上隅角瓦斯超限问题十分严重；采空区5m处埋管，治理上隅角瓦斯积聚的效果欠佳，达不到安全开采的条件；15m处埋管可以较好的解决上隅角瓦斯超限问题，工作面没有出现瓦斯积聚现象，工作面和回风巷的瓦斯浓度始终处于1％以下；25m处埋管的效果与15m基本相同，没有表现出更好的瓦斯治理效果。综合数值模拟的结果，确定了上隅角埋管抽放采空区瓦斯的理想抽放位置为距离地板垂高1．2m、沿走向深入采空区15m处。     

两相分配式生物反应器处理高盐废水中的苯酚

采用新型两相分配式生物反应器(TPPB)和前期研究得到的高效苯酚降解菌对高盐废水中苯酚的降解进行研究,研究中确定煤油为反应系统的最佳有机溶剂,并考察了废水苯酚含量、废水盐度以及搅拌器搅拌速度对苯酚降解的影响。结果表明,反应系统能正常降解苯酚含量为1 000～2 500 mg/L的高盐苯酚废水;反应系统在含盐量为100 g NaCl/L、搅拌速度为50 r/min的运行工况条件下,降解时间缩短为52 h,总酚去除率为20.58 mg/(L.h)。